Our next show will be NAB (https://nabshow.com/2022/) in Las Vegas, NV April 23 – 27, 2022. Please visit us at: C7122!

We’re demonstrating the modularity of QPC’s QPlex expanded beam connector product line and how to populate them. The QPlex comes in a couple of different sizes, a QPlex 3, a QPlex 4 and a QPlex 6 which differ in cavity size. The cavities are able to accept a standard QMicro insert. The inserts can have…

Below is a look at how we complete strain relief pull testing. The process is intended to test the tensile strength of the cable and strain relief of the connector. We used a FIS Blue Tactical cable for the test. The specification for cable retention in the QLink Specification sheet is 400 lbs. For more…

Here’s a quick look at polishing QPC’s QLink APC Termini using Krell Technologies’ Universal APC Polishing Fixture that can handle ferrules from 1mm to 3mm OD. Keying is accomplished using 3D Printed Fixtures specific to the termini or connector being polished. The results are highly consistent and repeatable as verified by our Promet FiBO Interferometer…

We’ve created a detailed instructional video on how to terminate our QMini connectors. This video is intended to supplement the on-line customer assembly instructions. If you’re interested in the product or would like more information on the assembly process, please reach out!

“Fiber Connections has worked with QPC for several years now. The service and support has always been amazing! Their product line is extensive and they are always willing to spend time sharing their knowledge about the harsh environment connectivity space.” -Steve Lund of Fiber Connections

QPC is excited to announce we’ve added 45 and 90 degree backshells to our QLink product line! These are specifically designed for use in space constrained areas because they allow tight clearance. They are IP68 rated and available in all standard sizes, materials, and finishes that the QLink line offers.

Here is an insider look at how we create our new 90 Degree Backshells our QLink product line. Using the 5-axis capabilities, high capacity turret, dual spindles, and live tooling on the Doosan Puma Mill Turn 2600SY II, we are able to make this complex part in a single operation. Thank you to Ellison Technologies…

Meet the QPC team! We’re engineers, salespeople, manufacturers, customer service representatives and we’re all here to serve you. Our team is made up of skilled and well-trained individuals who are dedicated to the work that they do. Here is a glimpse of what occurs day-to-day at the QPC headquarters.