We’re demonstrating the modularity of QPC’s QPlex expanded beam connector product line and how to populate them. The QPlex comes in a couple of different sizes, a QPlex 3, a QPlex 4 and a QPlex 6 which differ in cavity size. The cavities are able to accept a standard QMicro insert. The inserts can have…

Below is a look at how we complete strain relief pull testing. The process is intended to test the tensile strength of the cable and strain relief of the connector. We used a FIS Blue Tactical cable for the test. The specification for cable retention in the QLink Specification sheet is 400 lbs. For more…

Here’s a quick look at polishing QPC’s QLink APC Termini using Krell Technologies’ Universal APC Polishing Fixture that can handle ferrules from 1mm to 3mm OD. Keying is accomplished using 3D Printed Fixtures specific to the termini or connector being polished. The results are highly consistent and repeatable as verified by our Promet FiBO Interferometer…

We’ve created a detailed instructional video on how to terminate our QMini connectors. This video is intended to supplement the on-line customer assembly instructions. If you’re interested in the product or would like more information on the assembly process, please reach out!